Monday, September 20, 2010

Type-29R Cross Flow Intercooler Kit

   Extra-larger Intercooler for high horsepower GTRs

With more and more modified R35 GTRs in the 600-1000hp range, it was important for us to offer a XL Intercooler option. The new Cross-flow design not only looks good, but cools great!

The complete kit features an extra large, high cooling Type‐29, R‐spec intercooler core, which is ideal for over 900hp. Four specially designed light‐weight 3‐piece end‐tanks smooth out the flow for a side‐to side cross‐flow set‐up for increased efficiency; while the configuration keep upper grill area open for vital engine cooling.

UPDATE: Optional Carbon Air Ducting.

The Cross-flow Intercooler Upgrade Kit includes:

• Full complete kit with piping from turbo to throttle with 2 Type-RZ Blow Off Valve
• Extra Large Type-29 core. DIM: Height 302mm(12in) x Length 710mm (28in) x Width 115mm (4.5in)
• High Quality Spec-R inner fin core
• High polished core tubes and end-tanks
• Cross-flow type set-up, more efficient than turn flow
• Airflow meter extension is required to swap the airflow meter sensor signals to the opposite banks (Wires included)
• Designed for GReddy turbo kit (part# 11520101), also compatible with stock turbos (and most upgraded stock turbos)
• Made in Japan

#12020486 GTR R35 Intercooler Kit SPEC-R HG T-29 Full kit (w/pipe kit and Type-RZ BOV)

#12020487 GTR R35 Intercooler Kit SPEC-R HG T-29 Conversion Kit
• For vehicles which already have the GReddy Hard-piping Kit with Blow-off Valve.

Wednesday, September 8, 2010

GReddy Twin Turbo Uprade Kit for the R35

    The heart of any GR9 Build, the Twin Turbo Kit!

The key to the success of all our GR9 vehicles all include our Twin TD06SH-20G Twin Turbo Upgrade Kit. As well as being among the 1st kits on the market, it has also been one of the best proven packages available for the R35 GTR to date.  When looking for power in the 800-1000 plus hp range, a full turbo upgrade is a must and the GReddy Twin Turbo Kit delivers it with great components.  Proven and tested, quick response, high power TD06SH-20G turbo provide the reliable base, while smooth flowing, hand built, header-type turbo manifolds feed exhaust gases to the turbos.  Large twin GReddy Type-R Wastegates and inter-graded down pipes expel excess pressure to the exhaust.  The turbo kit also includes lightweight, large diameter, compression piping.  Another plus is the included cold air suction piping with high-flow Airinx air-filters located in the nose of the car.  (This turbo kit is compatible with both the Type-06R or Type-29R intercooler kits.) 

UPDATE: larger, high-flow cast manifolds coming soon!

Check out this movie featuring the install and running of our Twin TD06SH-20G turbo upgrade kit for the R35 GTR. With skilled tuning the kit can make upwards of 1000hp and provide consistent and reliable 9sec quarter mile passes.

for more details, please see: (here)  P/N 11520101

Saturday, September 4, 2010

R35 DCT Transmission Cooler Kit

   It's all about keeping your Transmission in top shape.

Trying to put down all that power to the ground requires a good transmission. To keep the R35's transmission and it's transmission Oil in top shape, we have developed a great cooling system for the DCT (Dual Clutch Transmission) found on the R35 GTR.

The kit features our famous Blue (inner-fin) large 13row core mounted in front fender. It also includes a FRP divided air duct, (similar to the OEM unit on the other side of the car,) for maximum cooling.

Installation is easy thanks to specialized GReddy R35 trans oil block. The internal thermostat insures quick fluid warm-up and consistent oil temps, and does not tax the standard coolant system.

Carefully designed light-weight -14 hard-lines & braided-lines allow for a minimal routing lengths and maximum flow. Completing the kit are all the necessary mounts, hose fitting and 3 piece billet flanges with o-rings.

Also available as an option, is our GReddy R35 Window Washer Tank option. This is ideal to keep you window washer working even with use of either our DCT or front-mounted Intercooler kits.

for more details, please see: (here) P/N 1204810